ASTM G85-11英文简介

1. Scope

1.1 This practice covers and sets forth conditions for five modifications in salt spray (fog) testing for specification purposes. These are in chronological order of their development:

1.1.1 Annex A1, acetic acid-salt spray test, continuous.

1.1.2 Annex A2, cyclic acidified salt spray test.

1.1.3 Annex A3, seawater acidified test, cyclic (SWAAT).

1.1.4 Annex A4, SO2 salt spray test, cyclic.

1.1.5 Annex A5, dilute electrolyte cyclic fog dry test.

1.2 This practice does not prescribe the type of modification, test specimen or exposure periods to be used for a specific product, nor the interpretation to be given to the results.

1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.3.1 Exception—Fahrenheit temperature values are given for information only throughout this practice.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to consult and establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents

ASTM Standards

B117 Practice for Operating Salt Spray (Fog) Apparatus

D609 Practice for Preparation of Cold-Rolled Steel Panels for Testing Paint, Varnish, Conversion Coatings, and Related Coating Products

D1141 Practice for the Preparation of Substitute Ocean Water

D1193 Specification for Reagent Water

D1654 Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments

E70 Test Method for pH of Aqueous Solutions With the Glass Electrode

Q-fog 盐雾腐蚀试验箱用于ASTM G85-11腐蚀测试的步骤

Q-fog 盐雾腐蚀试验箱用于ASTM G85-11腐蚀测试的步骤